MX







		YOUR RACE TECH CANADA HEADQUARTERS

Products & Services


	Fork Re-Valve(KTM/Honda/Yamaha/Kawaski/Suzuki) $350.00

Your forks are completely disassembled, cleaned and inspected. Valving is selected and installed in your forks based on your bike model, your weight, terrain and riding ability. Your setup will be specifically tuned to where you ride. We then recharge them with Race Tech oil, and set the levels. We are constantly testing new setups, we will install any updated valving specs for you at no additional charge when you pay for routine fork servicing.

* Oil included. Springs, seals, bushings or other wear items not included.


	Mid Valve Modification $75.00


	On Certain bikes the overall damping and plushness can be dramatically improved by modification of the mid valve. This mod is combined with our re-valving to create the best “firm but plush” ride. Available with re-valve on certain models.


	Race Tech Fork Gold Valves $199.95

		Gold Valves dramatically improve the plushness and overall action of your forks. We custom tailor your valve specs to work with the Gold Valves. A Huge improvement over stock valves.


	DLC2 Lower Fork Leg Coatings $695.00

Plus $125.00 Disassemble/Reassemble Fee. (Fee waived with fork re-valve)

DLC2 (Diamond Like Coating) is the ultimate way to reduce “stiction” in today’s forks. This ultra hard coating reduces friction, allowing the fork to work smoothly with very little resistance.

*Please allow 2-3 weeks turnaround for this service.


	Fork Springs $139.95


	We use high quality Race Tech fork springs. We will help you select the proper spring rate for your specifications.


	Fork Service $125.00+oil


		Your forks are completely disassembled, cleaned and inspected. We recharge them with tech oil and set the level to your specifications.

	Fork Seal Replacement (stand alone) $125.00

Fork Seal Replacement $50.00 (with re-valve or fork service)

			* seals, wipers and bushings not included - (call for prices)


	Shock re-valve(KTM/Honda/Yamaha/Kawasaki/Suzuki) $300.00

Your shock is completely disassembled, cleaned and inspected. Valves are selected and installed in your shocks based on your bike model, your weight, terrain and riding ability. Your setup will be specifically tuned to where you ride. We then recharge the shock with tech oil. We are constantly testing new setups, install any updated valve specs for you at no additional charge when you pay for routine shock servicing.

*Oil included. Springs, seals, bushings or other wear items not included.


	Race Tech Shock Gold Valve $199.95


	Gold valves dramatically overall action of your valve specs to work improvement over the


	improve the plushness and shock. We custom tailor your with Gold Valves. A HUGE stock valve


	Race Tech Progressive Shock Needle (KTM) $159.95


	The progressive needle works in conjunction with the valving and progressive spring to create a true rising rate system. This is a must have for any serious KTM rider.


	Race Tech Bladder Conversion (KTM) $164.95 - $189.95


	Converting your KTM shock to a bladder system allows you to increase oil capacity, provide for more consistent damping and reduces shock fade.


	Shock Shaft DLC Coating $295.00

* Plus $125.00 disassemble/reassemble fee. (Fee waived with shock re-valve)

DLC2 (Diamond Like Coating) is the ultimate way to reduce “stiction” in today’s shocks. This ultra hard coating reduces friction, allowing the shock to work smoothly with very little resistance.

* Please allow 2-3 weeks turnaround for this service


	Shock Springs (Honda/Yamaha/Kawasaki/Suzuki) $134.95


		KTM-Progressive Rate $199.95

	We use high quality Race Tech shock springs. We will help you select the proper spring rate for your specifications.


	Shock Seal Replacement (stand alone) $125.00

* (with re-valve or shock service) $50.00

* Seal, wiper and bushings not included.

**** ALL PRICING IS IN CANADIAN FUNDS AND SUBJECT TO CHANGE WITHOUT NOTICE ****

FOR A QUOTE PLEASE CONTACT US


	[Home] [MX] [Dual Sport] [ATV Contact] [Street] [Vintage] [Shock Clock and Dyno] [Contact]